| Cantilever
studs, per brake (pair) |
£25.00 |
| Cantilever
bridge on seat stay, including adjuster |
£25.00 |
| Cantilever
boss, including removal of old (per stud) |
£25.00 |
| Cable
stop, guide, pump peg or mudguard eye (per item) |
£8.00 |
| Gear
hanger |
£30.00 |
| Bottle
bosses including stainless bolts (braze-on or rivet-in type) |
£15.00 |
| Lever
boss (per boss) |
£10.00 |
| Allen key
seat clamp boss, including stainless steel binder bolt |
£30.00 |
| Rack eyes
for Blackburn carrier, front or rear (4 point fixing) |
£30.00 |
| Front
mech braze on plate (specify large chaining size, Shimano/Campag
dbl or tpl) |
£25.00 |
| Gear
tunnel on or under bottom bracket |
£10.00 |
| Lamp boss
(rack eye type) usually on R/H fork blade, including stainless
bolt |
£10.00 |
| Fit
dynamo or torque arm plate, Please supply dynamo/hub for fitting
position |
£25.00 |
| Removal
charge for braze on fitting, includes cleaning tube after fitting
removed |
£8.00 |
| Brake
bridge, including removal of old bridge |
£35.00 |
| Chain
stay bridge, including removal of old bridge |
£30.00 |
| Ream and
sleeve bottom bracket (thread replacement both sides) |
£65.00 |
| Ream and
sleeve gear hanger |
£30.00 |
| Re-track
frame and forks. Full track including wheel check |
£30.00 |
| Re-track
frame only. Full track including wheel check |
£25.00 |
| Alter
rear dropout spacing |
£25.00 |
| Straighten
and track forks |
£25.00 |
| Remove
stuck seat pin or handlebar extension, from - |
£25.00 |
| Thread
down fork column, per inch |
£20.00 |
| Labour to
fit disc mount plate, plate NOT included, steel frames only, disc,
hub and calliper required |
£50.00 |
|
All braze on components
(as description) are included in the above prices unless
stated otherwise
|
View Basket